
If you have a disabled dog, you know that one of the most important things you can do for your furry friend is to help them maintain their mobility.
A dog wheelchair is one way to do that, but it can be expensive. If you’re handy with some basic tools, you can build your own dog wheelchair from an old baby stroller.
This blog post will show you How to Make a Dog Wheelchair Out of a Baby Stroller. This is a great project for disabled dogs who need help getting around.
1. Gather the Materials You’ll Need for DIY Dog Wheelchair
If you’re looking to make DIY dog wheelchairs on your own, you’ll need the following materials and tools.
First, you’ll need an old baby stroller that is in good condition. This can be easily obtained from your local thrift store or garage sale.
In addition, you’ll need a hacksaw to cut down the legs of the stroller so that they are closer in height to dog wheelchair wheels.
Next, you’ll need some PVC pipe and pipe insulation to construct the wheelchair frame of your dog wheelchair.
Finally, you’ll need duct tape, pliers, a drill, 1/2-inch bolts with washers, and nuts to attach the dog wheelchair wheels to the frame.

With these simple materials and tools, you can easily create your own dog wheelchair using an old baby stroller!
2. Remove the fabric and wheels from the stroller
To remove the fabric and wheels from a baby stroller in order to make a dog wheelchair, start by removing any front-facing space that may be blocking access to the back of the stroller.
Next, remove the chair frame by disconnecting it from the various struts and supports holding it. At this point, you should have access to all of the components needed to customize your dog’s new wheelchair: fabric, wheels, and joints.
To create the dog wheelchair itself, simply attach your dog’s existing legs and tail to their respective places on the stroller frame. Then, once all these elements are securely fastened in place, replace any fabric panels you may have removed at the beginning, and get ready to watch your dog run free again!
3. Cut and attach the appropriate straps

In order to make a dog wheelchair for your dog, you will need to cut and attach the appropriate straps to the dog’s body, wheels, and frame. First, you need to find an old baby stroller that fits your dog properly.
Once you have selected a suitable stroller, the next step is to measure your dog from his rear legs up to his hip bones. This measurement will tell you how long each of the wheels on the dog’s wheelchair should be.
Next, you will need to cut small straps out of sturdy fabric and attach them securely to each of the wheels. These straps should also be long enough so that they can wrap around your dog’s body as well as the frame of the baby stroller.
Finally, once all these components are in place, you can attach everything together using a combination of screws and glue, ensuring that everything is fastened tightly and securely so that your dog can use his new wheelchair easily. Good luck!
4. Sew on a new cover or use a blanket to protect your pet’s skin
When making a dog wheelchair for your disabled pet, one of the first steps is deciding whether to sew on a new cover or use a blanket to protect your dog’s skin.
If you choose to use an old stroller seat, you may find that it fits better with your dog’s chest than other dog wheelchairs would. Alternatively, if you’re looking for a more cost-effective solution, you could consider making a dog wheelchair out of DIY materials like wood and metal tubing.
However, keep in mind that there are some risks associated with this approach. For example, dogs with paralyzed hind legs may find it difficult to drag their front legs across uneven terrains such as gravel or grass.
Ultimately, the best approach will depend on factors such as your dog’s current condition and mobility needs. So when considering how to make a dog wheelchair for your four-legged friend, carefully weigh all your options before making a final decision!
5. Test out your dog wheelchairs and make any necessary adjustments
After converting a baby stroller into a dog wheelchair, it’s important to test it out and make any necessary adjustments. First, ensure that the dog is safe in the stroller and that there is enough weight limit to support its size. Next, check the leg openings to make sure that your dog’s legs fit comfortably and doesn’t get pinched when moving around.
Finally, consider your dog’s size – a small dog might fare better in a dog stroller with two wheels in the back than one with two wheels up front. With these simple steps, you can be sure that your dog is able to enjoy its new DIY dog wheelchair with ease and comfort!
Conclusion: How to Make a Dog Wheelchair Out of a Baby Stroller

Whether your dog has lost the use of its legs or is suffering from mobility issues due to old age, a dog wheelchair can help ensure that he or she retains some degree of independence and mobility.
The best way to make a dog wheelchair out of an old baby stroller is to start by gathering all the materials you will need. This might include screws, nuts, bolts, washers, corrugated plastic sheets for the wheels, durable fabric for strapping your dog in, and any other small items you think you may need.
Once your materials are secured, it’s time to get down to business! First, measure and cut your plastic sheets according to the size and number of wheels your dog will use. Next, attach the plastic sheets to each wheel and ensure they are secure with nuts and bolts.
Finally, go ahead and strap your dog into the wheelchair using straps attached to ground points beneath him or her. Be sure that all parts are securely fastened so you can safely walk your dog around without worry.
With your dog now ready for adventure, feed it good food, then sit back and watch how much life he or she gets out of this new mobility device! Whether you’re enjoying a relaxing stroll together at the park or taking in a new view on an otherwise inaccessible mountain trail, this custom-made dog wheelchair will enable you and your pup to make lasting memories together.
And best of all? It didn’t cost much at all! So what are you waiting for? Start making a dog wheelchair out of that old baby stroller today!
As a mother of three, Stacey is active with anything that will help her children. Their neighborhood has a parenting group which has meetings that will help one another whether it be recipes or household cleaning. She is also active with playgroups and programs which motivates her children to be active.